Training For Selection of Internet of Things Devices as A Media For Remote Information Sender For Vocational School Teachers and Students

Dede Irawan Saputra, Hajiar Yuliana, Fauzia Haz, Giri Angga Setia, Dede Furqon Nurjaman, Naftalin Winanti, Irvan Budiawan

Abstract


Selection of devices for IoT needs can be determined based on the range from the shortest to the furthest, and on the internet access or Wi-Fi availability, which can be considered in advance and adjusted to the needs. In line with this, a training was carried out at SMKN 1 Cimahi, involving several groups of experts in the Electrical Engineering familyto open insight and understanding regarding the needs of devices that can be used to build internet-based or IoT systems. This training also introduced several observation schemes with various platforms, that are available in both free and paid choices. The training activities were carried out for 16 hours face-to-face, and 16 hours of independent projects that consisted of 10 modules. Out of these activities, it is expected that the participants can improve their thinking skills and carry out system programming processes according to needs and readiness.

Keywords


Internet of Things; IoT Platform; IoT Architecture

Full Text:

PDF

References


Aburukba, R. (2015) ‘Role of Internet of Things in the Smart Grid Technology’, Journal of Computer and Communications, 3(May), pp. 229–233.

Angelova, N., Kiryakova, G. and Yordanova, L. (2017) ‘The Great Impact of Internet of Things on Business’, Trakia Journal of Science, 15(Suppl.1), pp. 406–412.

Biswas, A. R. and Giaffreda, R. (2014) ‘IoT and Cloud Convergence : Opportunities and Challenges’, in IEEE World Forum on Internet of Things (WF-IoT) Sharing, pp. 375–376.

Fahmi, F. S. and Saputra, D. I. (2019) ‘Pengontrolan Bukaan Valve Pada Sistem Vessel Separator Dengan Metode Logika Fuzzy Berbasis Node Nirkabel’, in SENTER 2019: Seminar Nasional Teknik Elektro 2019, pp. 135–149.

Fitriyah, H. and Setyawan, G. E. (2019) ‘Sistem Pemantauan Menggunakan Blynk dan Pengendalian Penyiraman Tanaman Jamur Dengan Metode Logika Fuzzy’, Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 3(4), pp. 3258–3265.

Karthikeyan, P. et al. (2020) ‘Electronic Vaccine Monitoring System’, International Journal of Recent Technology and Engineering, 8(6), pp. 3963–3968.

Najmurrokhman, A. et al. (2018) ‘Prototipe Sistem Kendali Suhu dan Kelembaban dalam Ruang Budidaya Jamur Tiram menggunakan Mikrokontroler Arduino Uno dan Sensor DHT11’, in SENTER 2018, pp. 27–34.

Najmurrokhman, A., Zainal, Y. B. and Sari, S. C. (2014) ‘Perancangan Pengendali dengan Umpan Balik Keadaan untuk Networked Perancangan Pengendali dengan Umpan Balik Keadaan untuk Networked Control Systems’, in Seminar Nasional Multidisiplin Ilmu Universitas Budi Luhur.

Saputra, D. I., Ahkam, A. D. and Iskandar, H. R. (2021) ‘Optimasi Kendali Kelembaban Tanah Berbasis Jaringan Nirkabel Menggunakan Algoritma Fuzzy-PID’, Electronica and Electrical Journal Of Innovation Technology, 2(1), pp. 1–11.

Tahtawi, R. Al, Andika, E. and Harjanto, W. N. (2018) ‘Desain Awal Pengembangan Sistem Kontrol Irigasi Otomatis Berbasis Node Nirkabel dan Internet-of-Things’, JOKI, 10(2), pp. 121–132.




DOI: https://doi.org/10.26760/rekaelkomika.v4i1.45-53

Refbacks

  • There are currently no refbacks.


Address:

Electrical Engineering Institut Teknologi Nasional Bandung
20th Building 3rd Floor
Jl. PHH. Mustapa 23 Bandung 40124
Tlp. 022-7272215, Fax. 022-7202892,
e-mail: rekaelkomika@itenas.ac.id

Indexed:

 

STATISTIK PENGUNJUNG
Flag Counter
 

Lihat Statistik

Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License