Simple Control System Training for Students and Teachers of Vocational School in Purwakarta

Diky Zakaria, Dewi Indriati Hadi Putri, Muhammad Rizalul Wahid, Rezka Bunaiya Prayudha, Fauzie Salman, Alimudinsyah Alrasyid, Muhammad Bilal Hamzah, Agung Satria Pamungkas, Dany Syauqi Nazhif

Abstract


Everyday life depends on control systems. If a system has a good control system, it will give you the results we want. Through the control system, we can change things like temperature, speed, pressure, level, and other physical numbers to the way you want them to be. There are two kinds of control system: open loop control and closed loop control. The open loop control system is the easiest to use because the person controls the system without getting any feedback. While the closed loop control system will get feedback from the system output so that the system will automatically reach the desired state. Teachers and children at vocational school in Purwakarta get to try out open loop and closed loop control system applications during this community service project. This is important so that teachers and students can get the experience in control system application.


Keywords


simple control system; vocational school; teacher; student;

Full Text:

PDF

References


Akbar, I., Ismail, N., Hamidi, E. A. Z., & Zakaria, D. (2021). PI-Based SRM Speed Control System. 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 190–194.

Burlian, A., Rahmanto, Y., Samsugi, S., & Sucipto, A. (2021). Sistem Kendali Otomatis Pada Akuaponik Berbasis Mikrokontroler Arduino Uno R3. Jurnal Teknologi Dan Sistem Tertanam, 2(1), 1–6.

Hidayat, D. (2018). Analisis Respon Pengontrol on-Off Pada Kendali Umpan Balik Sistem Fisis Elektronik. EKSAKTA: Berkala Ilmiah Bidang MIPA, 19(1), 118–124. https://doi.org/10.24036/eksakta/vol19-iss1/119

Natsir, M., Rendra, D. B., & Anggara, A. D. Y. (2019). Implementasi IOT Untuk Sistem Kendali AC Otomatis Pada Ruang Kelas di Universitas Serang Raya. Jurnal PROSISKO (Pengembangan Riset Dan Observasi Rekayasa Sistem Komputer), 6(1), 69–72.

Nise, N. S. (2020). Control System Engineering (7th ed.). Wiley Online Library.

Ogata, K. (2010). Modern Control Engineering (5th ed.). Prentice Hall.

Pramanda, D., & Aswardi, A. (2020). Sistem Kendali Kecepatan Motor DC Berbasis Arduino dengan Metode Open Loop. JTEV (Jurnal Teknik Elektro Dan Vokasional), 6(1), 187.

Yunas, R. P., & Pulungan, A. B. (2020). Sistem Kendali Suhu dan Kelembaban pada Proses Fermentasi Tempe. JTEV (Jurnal Teknik Elektro Dan Vokasional), 6(1), 103.

Zakaria, D., Hindersah, H., Syaichu-Rohman, A., & Abdullah, A. G. (2021). PI and PI Antiwindup Speed Control of Switched Reluctance Motor (SRM). 2021 International Seminar on Intelligent Technology and Its Applications (ISITIA), 46–51.

Zakaria, D., Muttaqin, M. H., Suranegara, G. M., Irawan, E. N., & Venica, L. (2022). The Training of Making Graphical User Interface (GUI) Using Python for Teachers and Students of Engineering Vocational School in Purwakarta. REKA ELKOMIKA: Jurnal Pengabdian Kepada Masyarakat, 3(3), 152–159.




DOI: https://doi.org/10.26760/rekaelkomika.v4i3.255-262

Refbacks

  • There are currently no refbacks.



Address:

Electrical Engineering Institut Teknologi Nasional Bandung
20th Building 3rd Floor
Jl. PHH. Mustapa 23 Bandung 40124
Tlp. 022-7272215, Fax. 022-7202892,
e-mail: rekaelkomika@itenas.ac.id


Indexed:

 


STATISTIK PENGUNJUNG
Flag Counter
 

Lihat Statistik

Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License