Kendali Kecepatan Motor DC dengan Buck Converter menggunakan Full State Feedback-Pole Placement

NUR SULISTYAWATI, FAHMIZAL FAHMIZAL, IOTA NATHASYA

Sari


ABSTRAK

Makalah ini menyajikan penjelasan tentang penerepan full state feedback menggunakan metode pole placement pada sistem buck converter dengan Motor DC. Penambahan komponen buck converter diharapkan dapat membantu menaikkan nilai efisiensi sistem dan memperpanjang umur komponen switch yang digunakan. Namun terkadang sistem ini masih memerlukan kendali untuk dapat memaksimalkan perfoma sistem baik dari segi rising time, settling time maupun error steady state dari sistem. Simulasi kendali full state feedback menggunakan pole placement disimulasikan dengan pemodelan buck converter dan motor DC menggunakan Simscape dan Simulink pada Matlab. Dari hasil simulasi diperoleh bahwa kendali pole placement mampu menghasilkan kondisi rising time 1.4508s, settling time 2.5729s sedangkan kendali LQR lebih lambat 0.9524s untuk rising time dan 4.3603s untuk settling time saat diuji dengan sinyal step. Selain itu, penambahan pre compensator (Nbar) telah membuat sistem mampu mencapai nilai referensi yang diharapkan (error steady state menuju nol).

Kata kunci: Motor DC, Buck Converter, Pole Placement.

 

ABSTRACT

This paper presents an explanation of the advanced full state feedback using the pole placement method in a buck converter system with a DC motor. The addition of buck converter components is expected to help increase the value of system efficiency and extend the life of the switch components used. However, sometimes this system still requires control to be able to maximize system performance in terms of both the rising time, the settling time and the steady state error of the system. Full state feedback control simulation using pole placement is simulated by modeling the buck converter and DC motor using Simscape and Simulink in Matlab. The simulation results show that the pole placement control is capable of producing a rising time of 1.4508s, settling time of 2.5729s, while LQR control is 0.9524s slower for rising time and 4.3603s for settling time when tested with step signals. In addition, the addition of a pre compensator (Nbar) has made the system able to reach the expected reference value (steady state error goes to zero).

Keywords: DC Motor, Buck Converter, Pole Placement.


Kata Kunci


Motor DC; Buck Converter; Pole Placement

Teks Lengkap:

PDF

Referensi


Aravind, M. A., Saikumar, N., & Dinesh, N. S. (2017). Optimal position control of a DC motor using LQG with EKF. 2017 International Conference on Mechanical, System and Control Engineering, ICMSC 2017, (pp. 149–154). https://doi.org/10.1109/ICMSC.2017.7959461

Bae, J., Cho, K., & Lee, D. H. (2020). Parallel position control scheme of permanent magnet DC motors with a low-resolution sensor. Proceedings of the IEEE International Conference on Industrial Technology, 2020-February, (pp. 199–204). https://doi.org/10.1109/ICIT45562.2020.9067269

Chotai, J., & Narwekar, K. (2018). Modelling and position control of brushed DC motor. International Conference on Advances in Computing, Communication and Control 2017, ICAC3 2017, (pp. 1–5). https://doi.org/10.1109/ICAC3.2017.8318792

Dhanasekar, R., Kumar, S. G., & Rivera, M. (2019). Third order sliding mode control of buck converter fed permanent magnet DC motor. IEEE ICA-ACCA 2018 - IEEE International Conference on Automation/23rd Congress of the Chilean Association of Automatic Control: Towards an Industry 4.0 - Proceedings, (pp. 17–20). https://doi.org/10.1109/ICA-ACCA.2018.8609812

El Fadil, H., & Giri, F. (2006). Robust control of DC motor velocity through DC-DC Buck Power Converter. IECON Proceedings (Industrial Electronics Conference), (pp. 1563–1568). https://doi.org/10.1109/IECON.2006.347286

Fahmizal, Arrofiq, M., Adrian, R., & Mayub, A. (2019). Robot Inverted Pendulum Beroda Dua (IPBD) dengan Kendali Linear Quadratic Regulator (LQR). ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, 7(2), 224. https://doi.org/10.26760/elkomika.v7i2.224

Fardoun, A. A., Member, S., Ismail, E. H., Member, S., Khraim, N. M., Sabzali, A. J., & Alsaffar, M. A. (2014). Bridgeless High-Power-Factor Buck-Converter Voltage Mode, 50(5), 3457–3467.

Ismail, R. M. T. R., Ahmad, M. A., & Ramli, M. S. (2009). Speed control of buck-converter driven Dc motor based on smooth trajectory tracking. Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009, (pp. 97–101). https://doi.org/10.1109/AMS.2009.100

Lefranc, P., Jannot, X., & Dessante, P. (2012). Virtual prototyping and pre-sizing methodology for buck DC-DC converters using genetic algorithms. IET Power Electronics, 5(1), 41–52. https://doi.org/10.1049/iet-pel.2010.0284

Lindiya, S. A., Vijayarekha, K., & Palani, S. (2016). Deterministic LQR controller for DC-DC Buck converter. 2016 - Biennial International Conference on Power and Energy Systems: Towards Sustainable Energy, PESTSE 2016. https://doi.org/10.1109/PESTSE.2016.7516450

Liu, Z., & Jiang, L. (2011). PWM speed control system of DC motor based on AT89S51. Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, (pp. 1301–1303). https://doi.org/10.1109/EMEIT.2011.6023332

Roy, T. K., Pervej, M. F., Tumpa, F. K., & Paul, L. C. (2017). Nonlinear adaptive controller design for velocity control of a DC motor driven by a DC-DC buck converter using backstepping approach. ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering, (pp. 8–10). https://doi.org/10.1109/ICECTE.2016.7879598

Seshagiri, S., Block, E., Larrea, I., & Soares, L. (2016). Optimal PID design for voltage mode ontrol of DC-DC buck converters. 2016 Indian Control Conference, ICC 2016 - Proceedings, (pp. 99–104). https://doi.org/10.1109/INDIANCC.2016.7441112

Srivastava, S., Kumar, Y., Misra, A., Thakur, S. K., & Pandit, V. S. (2013). Optimum design of buck converter controller using LQR approach. 2013 15th International Conference on Advanced Computing Technologies, ICACT 2013. ttps://doi.org/10.1109/ICACT.2013.6710514

Swathy, K., Jantre, S., Jadhav, Y., Labde, S. M., & Kadam, P. (2018). Design and Hardware Implementation of Closed Loop Buck Converter Using Fuzzy Logic Controller. Proceedings of the 2nd International Conference on Electronics, Communication and Aerospace Technology, ICECA 2018, (pp. 175–180). https://doi.org/10.1109/ICECA.2018.8474570

Tadrist, N., & Zeroug, H. (2014). Development of brushless DC motor drive system for teaching purposes using various PWM control techniques for speed control. 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics, COMPEL 2014 , (pp. 4–7). https://doi.org/10.1109/COMPEL.2014.6877150

Yurkevich, V. D., & Stepanov, N. A. (2014). PWM speed control of DC motor based on singular perturbation technique. International Congress on Ultra Modern Telecommunications and Control Systems and Workshops 2015, (pp. 434–440). https://doi.org/10.1109/ICUMT.2014.7002140




DOI: https://doi.org/10.26760/elkomika.v9i2.415

Refbacks

  • Saat ini tidak ada refbacks.


_______________________________________________________________________________________________________________________

ISSN (print) : 2338-8323 | ISSN (electronic) : 2459-9638

Publisher:

Department of Electrical Engineering Institut Teknologi Nasional Bandung

Address: 20th Building  Institut Teknologi Nasional Bandung PHH. Mustofa Street No. 23 Bandung 40124

Contact: +627272215 (ext. 206)

Email: jte.itenas@itenas.ac.id________________________________________________________________________________________________________________________


Free counters!

Web Analytics Made Easy - StatCounter

Statistic Journal

Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License