1.png)
An Optimizing of Piping System - Case Study Kereta Cepat Merah Putih (KCMP) Achmad
Sari
ABSTRAK
Kereta api berkecepatan tinggi merupakan salah satu alat transportasi modern yang paling berpengaruh di dunia karena keunggulannya seperti kecepatan yang tinggi, kenyamanan dalam berkendara, kapasitas angkut yang besar, dan konsumsi energi yang rendah. Salah satu tugas utama dalam sistem perkeretaapian adalah mengalirkan fluida yang saling terhubung satu sama lain berdasarkan desain yang telah dirancang. Tujuan dari penelitian ini adalah untuk mengembangkan desain sistem perpipaan dan routing pada Kereta Cepat Merah Putih (KCMP). Selain itu, penelitian ini juga membahas mengenai pemilihan material yang akan digunakan pada sistem perpipaan yang ringan dan juga ramah lingkungan.
Kata kunci: desain pipa, kereta cepat, bahan
ABSTRACT
The high speed train is one of the most influential modern means of transportation in the world due to their advantages such as high speed running, ride comfort, large transport capacity, and low energy consumption. One of the main tasks in railway system is to convey fluid that is interconnected to each other based on the design that has been designed. The objective of this paper is to develop a design of the piping and routing system at Kereta Cepat Merah Putih (KCMP). In addition, this research also discusses about selection of materials to be used in piping systems that are lightweight and also environmentally friendly.
Keywords: piping design, high speed train, materials
Kata Kunci
Teks Lengkap:
PDF (English)Referensi
M. M. Abdel Wahed Ahmed and N. Abd El Monem, “Sustainable and green transportation for better quality of life case study greater Cairo – Egypt,” HBRC Journal, vol. 16, no. 1, pp. 17–37, Jan. 2020, doi: 10.1080/16874048.2020.1719340.
S. Wang, R. Wang, Y. Xia, Z. Sun, L. You, and J. Zhang, “Multi-objective aerodynamic optimization of high-speed train heads based on the PDE parametric modeling,” Struct Multidisc Optim, vol. 64, no. 3, pp. 1285–1304, Sep. 2021, doi: 10.1007/s00158-021-02916-0.
M. Sohail, S. Venukumar, and M. V. Reddy, “An outline of piping design using CAESER II - Case Study,” Materials Today: Proceedings, vol. 4, no. 8, pp. 8269–8278, 2017, doi: 10.1016/j.matpr.2017.07.169.
M. Günay, M. E. Korkmaz, and R. Özmen, “An investigation on braking systems used in railway vehicles,” Engineering Science and Technology, an International Journal, vol. 23, no. 2, pp. 421–431, Apr. 2020, doi: 10.1016/j.jestch.2020.01.009.
M. Spiryagin, C. Cole, Y. Q. Sun, M. McClanachan, V. Spiryagin, and T. McSweeney, Design and Simulation of Rail Vehicles. CRC Press is an imprint of Taylor & Francis Group, 2014.
A. Genovese, S. Strano, and M. Terzo, “Design and multi-physics optimization of an energy harvesting system integrated in a pneumatic suspension,” Mechatronics, vol. 69, p. 102395, Aug. 2020, doi: 10.1016/j.mechatronics.2020.102395.
W. Jiqin, “Pantograph and Contact Line System,” Academic Press, pp. 27–71, Jan. 2018, doi: 10.1016/B978-0-12-812886-2.00002-1.
S. Frey, Railway Electrification Systems & Engineering, 1st ed. White Word Publications, 2012.
JIS G 3452, “Carbon steel pipes for ordinary piping.” Japanese Standards Association, 2019.
ISO 14726, “Ships and marine technology - Identification colours for the content of piping systems.” International Organization for Standardization, 2001.
DOI: https://doi.org/10.26760/jrh.v8i1.50-64
Refbacks
- Saat ini tidak ada refbacks.
Alamat redaksi dan tata usaha:
Lembaga Penelitian dan Pengabdian Masyarakat Institut Teknologi Nasional
Fakultas, gedung 14 Lantai 3
Jl. PHH. Mustapa 23 Bandung 40124
Tlp. 022-7272215 Pes. 159, Fax. 022-7202892,
e-mail: hrekayasa@itenas.ac.id
Terindeks:
 
 
 
Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.
