Email this article 
Hide
Show all
Kontrol Resume pada Mesin 3D Printer 2×2×2 Meter berbasis MCU Bigtree
Abstract
ABSTRAK
Dalam sebuah perusahaan manufaktur, produk yang dihasilkan selalu mengalami proses pengembangan tertentu yang mencakup pembuatan desain hingga menjadi prototype dengan tujuan untuk memenuhi kebutuhan konsumen. Salah satu mesin yang tepat dan efektif untuk pembuatan prototype adalah 3D printer. Energi listrik dibutuhkan selama proses printing, jika suplai energi listrik terhenti maka mesin 3D printer akan berhenti bekerja. Sehingga ketika suplai energi listrik tersambung kembali proses printing harus mengulang dari awal. Hal ini menyebabkan kerugian material dan waktu, semakin besar ukuran protoype yang dicetak maka akan semakin besar kerugian material dan waktunya. Oleh karena itu, mesin 3D printer memerlukan suatu kemampuan untuk menyimpan data posisi dan melanjutkan proses printing berdasarkan data tersebut. Berdasarkan pengujian akurasi penyimpanan data posisi ekstruder terhadap sumbu X, Y, Z, menggunakan AS5600 magnetic encoder didapatkan persentase error sebesar 0.004928649% pada sumbu X, 0.025628032% pada sumbu Y, 0.020581289% pada sumbu Z.
Kata kunci: 3D Printer, AS5600 Magnetic Encoder, Bigtree, Cartesian, Firmware Marlin, Resume
Â
ABSTRACT
In a manufacturing company, the products produced always undergo a certain development process which includes making designs to becoming prototypes with the aim of meeting consumer needs. One of the right and effective machines for prototyping is a 3D printer. Electrical energy is needed during the printing process, if the supply of electrical energy stops, the 3D printer engine will stop working. So that when the supply of electrical energy is reconnected the printing process has to repeat from the beginning. This causes material and time losses, the larger the printed prototype size, the greater the material and time losses. Therefore, a 3D printer machine requires the ability to store position data and continue the printing process based on that data. Based on testing the accuracy of ekstruder position data storage on the X, Y, Z planes, using the AS5600 magnetic encoder, the percentage error is 0.004928649% on the X axis, 0.025628032% on the Y axis, 0.020581289% on the Z axis.
Keywords: 3D Printer, AS5600 Magnetic Encoder, Bigtree, Cartesian, Marlin Firmware, Resume
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019). Additive manufacturing: Challenges, trends, and applications. Advances in Mechanical Engineering, 11(2), 1687814018822880.
Amri, A. A. N., & Sumbodo, W. (2018). Perancangan 3D Printer Tipe Core XY Berbasis Fused Deposition Modeling (FDM) Menggunakan Software Autodesk Inventor 2015. Jurnal Dinamika Vokasional Teknik Mesin, 3(2), 110-115.
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015). Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal.
Hager, I., Golonka, A., & Putanowicz, R. (2016). 3D printing of buildings and building components as the future of sustainable construction?. Procedia Engineering, 151, 292-299.
Hossain, M. A., Zhumabekova, A., Paul, S. C., & Kim, J. R. (2020). A review of 3D printing in construction and its impact on the labor market. Sustainability, 12(20), 8492.
Kamran, M., & Saxena, A. (2016). A comprehensive study on 3D printing technology. MIT Int J Mech Eng, 6(2), 63-69.
Khan, L. A., Mehtab, U., Hasan, E. U., & Hussain, Z. (2014). Design and Fabrication of a CNC Machine for Engraving and Drilling. International Interdisciplinary Journal of Scientific Research, 1(3), 1-7.
Malaeb, Z., AlSakka, F., & Hamzeh, F. (2019). 3D concrete printing: machine design, mix proportioning, and mix comparison between different machine setups. In 3D Concreteprinting technology (pp. 115-136). Butterworth-Heinemann.
Melnikova, R., Ehrmann, A., & Finsterbusch, K. (2014, August). 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials. In IOP conference series: materials science and engineering, 62(1), 012018. IOP publishing.
Muliyawan, M. D. (2017). Rancang Bangun Konstruksi Rangka Mesin 3D Printer Tipe Cartesian Berbasis Fused Deposition Modeling (Fdm). Jurnal Teknik Mesin Mercu Buana, 6(4), 252-257.
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196.
Nuñez, P. J., Rivas, A., GarcÃa-Plaza, E., Beamud, E., & Sanz-Lobera, A. (2015). Dimensional and surface texture characterization in fused deposition modelling (FDM) with ABS plus. Procedia Engineering, 132, 856-863.
Paolini, A., Kollmannsberger, S., & Rank, E. (2019). Additive manufacturing in construction: A review on processes, applications, and digital planning methods. Additive manufacturing, 30, 100894.
Stopforth, R. (2021). Conductive polylactic acid filaments for 3D printed sensors: Experimental electrical and thermal characterization. Scientific African, 14, e01040.
Sulayman, D., & Febriantoko, B. W. (2015). Pengaruh Suhu dari Heater Nozzle Terhadap Produk Printer 3D (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
Taufik, M., & Jain, P. K. (2016, August). Computer aided visualization tool for part quality analysis of additive manufacturing process. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 50107, V02AT03A034. American Society of Mechanical Engineers.
DOI: https://doi.org/10.26760/elkomika.v11i2.337
Refbacks
- There are currently no refbacks.
_______________________________________________________________________________________________________________________
ISSN (print) : 2338-8323 | ISSN (electronic) : 2459-9638
Publisher:
Department of Electrical Engineering Institut Teknologi Nasional Bandung, Indonesia
Address: 20th Building Institut Teknologi Nasional Bandung PHH. Mustofa Street No. 23 Bandung 40124, Indonesia
Contact: +627272215 (ext. 206)
Email: jte.itenas@itenas.ac.id
________________________________________________________________________________________________________________________
Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.
