Pengaruh Jenis Restraint pada Kekuatan Mekanik Support Untai FASSIP 03 NT

DEDY HARYANTO, GIARNO GIARNO, GREGORIUS BAMBANG HERU KUSNUGROHO, AINUR ROSIDI, ADHIKA ENGGAR PAMUNGKAS, MULYA JUARSA

Sari


ABSTRAK

Kegiatan penelitian yang dilakukan dilatarbelakangi oleh kejadian kecelakaan pada PLTN Fukushima Dai-Ichi Jepang. Untai Fasilitas Simulasi Sistem Pasif-03 Nanobubbles Transparent (FASSIP 03 NT) menggunakan fluida Nanobubbles sebagai fluida kerja. Support untai FASSIP 03 NT merupakan salah satu komponen di untai FASSIP-03 NT, berfungsi sebagai penopang seluruh komponen untai FASSIP 03 NT sehingga perlu diketahui kekuatan mekaniknya meliputi tegangan mekanik dan translational displacementnya. Metode pengujian dilakukan secara simulasi menggunakan software CATIA yang merekomendasikan penggunaan restraint jenis slider pada keempat kaki support untai FASSIP 03 NT. Dengan adanya penelitian sistem pasif ini maka kondisi ketiadaan catu daya listrik bagi pompa pendingin teras reaktor PLTN tidak berakibat fatal, karena sistem pendingin pasif dapat mengambil alih fungsi pendinginan pada teras reaktor.

Kata kunci: FASSIP 03 NT, tegangan mekanik, translasional displacement, restraint, clamp, slider

 

 

ABSTRACT

The research activity was carried out against the background of an accident at the Fukushima Dai-Ichi Nuclear Power Plant in Japan. Passive System Simulation Facility Strand-03 Nanobubbles Transparent (FASSIP 03 NT) uses Nanobubbles fluid as the working fluid. The FASSIP 03 NT strand support is one of the components in the FASSIP-03 NT strand, it functions as a support for all FASSIP 03 NT strand components so it is necessary to know its mechanical strength including mechanical stress and translational displacement. Methodology has been done through simulation testing using CATIA software, it is recommended to use a slider type restraint on the four legs of the FASSIP 03 NT strand support. With this passive system research, the condition of the absence of an electric power supply for the nuclear power plant reactor core cooling pump is not fatal, because the passive cooling system can take over the cooling function in the reactor core.

Keywords: FASSIP 03 NT, mechanical stress, translational displacement, restraint, clamp, slider


Kata Kunci


FASSIP 03 NT; Tegangan mekanik; Translasional displacement; Restraint, Clamp, Slider

Teks Lengkap:

PDF

Referensi


Anonim. 2011. Yield Strength-Strenth (Mecahnics) of material Strength. Desember 01. http://www.engineersedge.

Antariksawan, A. R. (2000). Accident Analysis of PWR Station Blackout with Pump Seal Leak Using Melcor 1.8. 4. Proceeding Semonar on Technology and Safety of Nuclear Power Plant and Nuclear Facilities.

Antariksawan, A. R., dkk. (2018). Simulation of Operational Conditions of FASSIP-02 Natural Circulation Cooling System Experimental Loop. Jurnal Sains dan Teknologi Nuklir Indonesia 19 (1).

Antariksawan, A. R., Widodo, S., Juarsa, M., Giarno, Kusuma, M. H., Putra, N. (2018). Preliminary Investigation of Natural Circulation Stability in FASSIP-01 Experimental Facility Using RELAP5 Code. AIP Conference Proceedings. 2001 (1).

Design, Bauer Energy. (2021). http://www.nanobubbles.com.

Haryanto, D., Giarno, Kusnugroho, G. B. H., Juarsa, M.,. (2020). Analisis Kekuatan Mekanik Main Steam generator pada Fasilitas PASCONEL. Prosiding Seminar Nasional Teknologi Energi Nuklir 2020.

Haryanto, D., Giarno, Witoko, J. P., Hatmoko, S., Santosa, K., Juarsa, M., Kusuma, M. H., Antariksawan, A. R., Putra, N. (2018). Analisis kekuatan Mekanik Water Cooling Tank pada Fasilitas Uji Untai FASSIP-02 Menggunakan CATIA. Jurnal Ilmiah Teknik Mesin POROS.

Haryanto, D., Rosidi, A., Kusnugroho, G. B. H., Juarsa, M. (2020). Analisis Kekuatan Mekanik Desain Bejana Molecular Sieve. Majalah Ilmiah Sigma Epsilon, Mei.

Juarsa, M., Antariksawan, A. R., Kusuma, M. H., Haryanto, D., and Putra, N. (2018). Estimation of Natural Circulation Flow Based on Temperature in The FASSIP-02 Large-Scale Tes Loop Facility. in IOP Conference Series: Earth and Environmental Science, 105(1).

Juarsa, M., Antariksawan, A. R., Kusuma, M. H., Haryanto, D., Putra, N. (2018). “Estimation of Natural Circulation Flow Based on Temperature in The FASSIP-02 Large-Scale Test Loop Facility. Earth and Environmental Science.

Juarsa, M., dkk. (2019). Preliminary Investigation on Natural Circulation Flow using CFD and Calculation Base on Experimental Data Pre-FASSIP-02. Jurnal IOP Conference Series: Journal of Physics.

Juarsa, M., dkk. (2011). Studi Eksperimental laju Aliran Massa Air Berdasarkan Perubahan Sudut kemiringan Untai pada Kasus Sirkulasi Alamiah Menggunakan Untai Sirkulasi Alamiah (USSA-FT01). Jurnal Material dan Energi Indonesia, Jurusan Fisika FMIPA, 22-30.

Kusuma, M. H., Putra, N., Ismarwanti, S., and Widodo S. (2017). Simulation of Wickless-Heat Pipe as Passive Cooling System in Nuclear Spent Fuel Pool Using RELAP5/MOD3. 2. International Journal on Advanced Science, Engineering and Information Technology, 7, 836-842.

Menteri Ketenagakerjaan, Republik Indonesia. (2016). Keselamatan dan Kesehatan Kerja Bejana Tekan dan Tangki Timbun. Peraturan Meteri Ketenagakerjaan Republik Indonesia Nomor 37 Tahun 2016.

Moleaer™. (2021). http://www.molear.com/nanobubbles.

Pinem, M. D., S.T. (2009). CATIA Si Jago Desain Tiga Dimensi. Jakarta Selatan 12630: Kawah Media, Jl. H. Montong .

Sun, D. C., Li, Y., Xi, Z., Zan, Y. F., Li, P. Z., Zhou, W. B.,. (2017). Experimental Evaluation of Safety Performance of Emergency Passive Residual Heat Removal System in HPR1000. Nuclear Engineering Design, 54-60.

Tjahjono, H. (2017). Comprehensive Prediction of Thermosyphon Characteristics in Reactor Passive Cooling System Simulation Loop FASSIP-01. Atom Indonesia, 157-166.

Wang, M., Tian, W., Qiu, S., Su, G., and Zhang, W. (2013). An Evaluation of Designed Passive Core Makeup Tank (CMT) for China Pressurized Reactor (CPR1000). Annals of Nuclear Energy, 81-86.

Wang, Y. (2013). Preliminary Study for the Passive Containment Cooling System Analysis of the Advanced PWR. Energy Procedia, 240–247.




DOI: https://doi.org/10.26760/elkomika.v10i2.394

Refbacks

  • Saat ini tidak ada refbacks.


_______________________________________________________________________________________________________________________

ISSN (cetak) : 2338-8323 | ISSN (elektronik) : 2459-9638

diterbitkan oleh :

Teknik Elektro Institut Teknologi Nasional Bandung

Alamat : Gedung 20 Jl. PHH. Mustofa 23 Bandung 40124

Kontak : Tel. 7272215 (ext. 206) Fax. 7202892

Surat Elektronik : jte.itenas@itenas.ac.id________________________________________________________________________________________________________________________

Statistik Pengunjung

Free counters!

Web

Analytics Made Easy - StatCounter

Lihat Statistik Jurnal

Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License