Optimasi Fuzzy Supervisory Control pada Performa Matrix Converter Drive 3x3 di Empat Kuadran Operasi
Sari
ABSTRAK
Teknologi pengemudian motor dengan efisiensi tinggi serta untuk mencapai empat kuadran operasi menjadi perhatian pada bidang pengemudian elektrik. Matrix converter menjadi alternatif utama konverter drive motor karena keunggulan – keunggulannya. Walaupun matrix converter sebagai drive motor mempunyai kompleksitas tinggi, namun dengan dikombinasikan teknik Indirect Space Vector Modulation (ISVM) dapat menghasilkan kepresisian lebar pulsa modulasi (PWM). Untuk pengendali sistem, diterapkan Fuzzy Supervisory Control (FSC), yang merupakan kendali gabungan, agar kecepatan referensi bisa tercapai. FSC dibandingkan dengan kendali konvensional (PI control) untuk membuktikan keoptimalan performa sistem yang diusulkan. Parameter performa sistem dan Total Harmonic Distortion (THD) dianalisis lebih lanjut. Hasil simulasi menunjukkan bahwa sistem yang diusulkan dapat mencapai Error Steady state (ESS) 0% dan THD lebih kecil.
Kata kunci: Matrix converter, ISVM, FSC, motor induksi.
Â
ABSTRACT
Motor-driving technology with high efficiency and to achieve four quadrants of operation is a concern in the area of electric steering. Matrix converter is the main alternative for motor drive converters because of its advantages. Although the matrix converter as a motor drive has a high complexity, combined with the Indirect Space Vector Modulation (ISVM) technique can produce precision pulse width modulation (PWM). For the system controller, Fuzzy Supervisory Control (FSC) is applied, which is a combined control, so that the reference speed can be achieved. FSC is compared with conventional control (PI control) to prove the optimization of the proposed system performance. System performance parameters and Total Harmonic Distortion (THD) are further analyzed. Simulation results show that the proposed system can reach 0% Error Steady State (ESS) and smaller THD.
Keywords: Matrix converter, ISVM, FSC, induction motor.
Kata Kunci
Teks Lengkap:
PDFReferensi
Ansari, S., & Chandel, A. (2017). Simulation based Comprehensive Analysis of Direct and Indirect matrix Converter fed Asynchronous motor drive. IEEE Uttar Prradesh Section International Conference on Electrical Computer and Electronics (UPCON), (pp. 9 – 15).
Dendouga, A., & Dendouga, A. (2019). High Performance Vector Control of Permanent Magnet Synchronous Motor Fed by Direct SVM Matrix Converter. IEEE International Conference on Power Electronics and Their Applications (ICPEA), 1(September), (pp. 1-6).
Ellabban, O., Abu-rub, H., & Baoming, G. (2014). A Quasi-Z-Source Direct Matrix Converter Feeding A Vector Controlled Induction Motor Drive. Journal of Emerging and Selected Topics in Power Electronics, 6777(c). https://doi.org/10.1109/JESTPE.2014.2309979
Guo, Y., Wang, X., Guo, Y., & Deng, W. (2018). Speed-sensorless direct torque control scheme for matrix converter driven induction motor. IET Power Electronics, 2018 (November 2017), 432–437. https://doi.org/10.1049/joe.2018.0016
Jati, M. P., Purwanto, E., Sumantri, B., & Basuki, G. (2020). Matrix Converter Sebagai Pengendali Kecepatan Motor Induksi 3 Fase Dengan ISVM. Jurnal Elkomika, 8(2).
Jiang, X., Xu, D., Gu, L., Li, Q., Xu, B., & Li, Y. (2018). Short-Circuit Fault-Tolerant Operation of Dual- Winding Permanent-Magnet Motor under the Four Quadrant Condition. IEEE Transactions on Industrial Electronics, 0046(c).
Krishnan, R., Park, S., & Ha, K. (2005). Theory and Operation of a Four-Quadrant Switched Reluctance Motor Drive With a Single Controllable Switch — The Lowest Cost Four-Quadrant Brushless Motor Drive. IEEE Transactions on Industry Applications, 41(4), 1047–1055.
Li, B., Zhou, S., Han, L., Wang, J., & Xu, D. (2019). Back-to-Back Modular Multilevel Converter Topology with DC-Link Switches for High-Power Four-Quadrant Variable Speed Motor Drives. 21st European Conference on Power Electronics and Applications (EPE ’19 ECCE Europe), (pp. 1 – 7).
Ma, X., Zhang, Z., Xu, D., & Wang, K. (2018). On Closed - loop Control of Matrix Converter with Double Voltage Control. IEEE Data Driven Control and Learning Systems Conference (DDCLS), (pp. 229 – 234).
Mushenya, J., Khan, M. A., & Barendse, P. S. (2019). Development of a Test Rig to Automate Efficiency Testing of Converter-Fed Induction Motors. IEEE Transactions on Industry Applications, 9994(c). https://doi.org/10.1109/TIA.2019.2928504
Nguyen, H., & Lee, H. (2017). An Effective SVM Method for Matrix Converters with a Superior Output Performance. IEEE Transactions on Industrial Electronics, 0046(c), 1–10. https://doi.org/10.1109/TIE.2017.2779438
Purwanto, E., Murdianto, F. D., Herlambang, D. W., Basuki, G., & Jati, M. P. (2019). Three-Phase Direct Matrix Converter With Space Vector Modulation for Induction Motor Drive. IEEE International Conference on Applied Information Technology and Innovation (ICAITI), (pp. 11 - 16).
Rivera, M., Wheeler, P., Olloqui, A., & Khaburi, D. A. (2016). A review of predictive control techniques for matrix converters-Part I. 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016, (pp. 582 - 588).
Su, M., Lin, J., Sun, Y., & Xie, S. (2018). A New Modulation Strategy to Reduce Common Mode Current of Indirect Matrix Converter. IEEE Transactions on Industrial Electronics, PP(c), 1. https://doi.org/10.1109/TIE.2018.2864698
Tiwari, S., & Rajendran, S. (2019). Four Quadrant Operation and Control of Three Phase BLDC Motor for Electric Vehicles. IEEE PES GTD Grand International Conference and Exposition Asia (GTD Asia), (pp. 577 – 582).
Ullah, S., Ahmad, I., & Muhammad, E. (2019). Design and Analysis of Fuzzy Supervisory Control of an Induction Motor. IEEE International Conference on Applied and Engineering Mathematics (ICAEM), (pp. 244 – 250).
Zhang, Z., & Bazzi, A. (2019). Robust Sensorless Scalar Control of Induction Motor Drives with Torque Capability Enhancement at Low Speeds. IEEE International Electric Machines & Drives Conference (IEMDC), (pp. 1706 – 1710).
DOI: https://doi.org/10.26760/elkomika.v9i1.31
Refbacks
_______________________________________________________________________________________________________________________
ISSN (cetak) : 2338-8323 | ISSN (elektronik) : 2459-9638
diterbitkan oleh :
Teknik Elektro Institut Teknologi Nasional Bandung
Alamat : Gedung 20 Jl. PHH. Mustofa 23 Bandung 40124
Kontak : Tel. 7272215 (ext. 206) Fax. 7202892
Surat Elektronik : jte.itenas@itenas.ac.id________________________________________________________________________________________________________________________
Statistik Pengunjung
Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.