Penerapan Fit Out Pada Desain Interior Tenant Toko PLAYWORKS Di Summarecon Mall Bandung

FADILAH SABAR ANUGRAH, Boyke Arief Taufik Firdaus

Abstract


ABSTRAK

 

Pembangunan pusat perbelanjaan modern (mall) memerlukan perencanaan dan pelaksanaan yang cermat guna mencapai tujuan yang diinginkan terutama dalam mewujudkan keunikan dan kenyamanan serta keamanan pada setiap tenant . Guna mencapai tujuan yang diinginkan manajeman mall mempunyai bidang fit out   untuk menjadi coordinator ruang sewa mall yang dapat membantu penyewa dalam mempersiapakan tenant  hingga pembukaan toko sesuai dengan standar yang ditetapkan. Salah satunya pada tenant  toko PLAYWORKS yang ada di Summarecon Mall Bandung. Penerapan fit out   pada tenant  toko PLAYWORKS difokuskan untuk membantu jalannya perencanaan dan Pembangunan toko tersebut berjalan dengan baik sesuai standar yang berlaku pada summarecon mall bandung.

 

Kata kunci: mall, fit out  , summarecon mall bandung, PLAYWORKS

 

ABSTRACT

 

The construction of a modern shopping center (mall) requires careful planning and implementation to achieve the desired goals, especially in realizing uniqueness, comfort and security for each tenant . In order to achieve the desired goals, mall management has a fit out   department to become a mall rental space coordinator who can assist tenant s in preparing tenant s to open shops in accordance with established standards. One of them is the PLAYWORKS shop tenant  at Summarecon Mall Bandung. The implementation of fit out   for PLAYWORKS shop tenant s is focused on helping the planning and construction of the shop run well according to the standards that apply at Summarecon Mall Bandung.

 

Keywords: mall, fit out  , summarecon mall bandung, PLAYWORKS


References


Acacia, R., Tjung, L. J., & Wirawati, S. (2020). Studi kelayakan pembangunan mall baru di Kota Harapan Indah. Jurnal Sains, Teknologi, Urban, Perancangan, Arsitektur (Stupa), 2(2), 2841–2850. https://doi.org/10.24912/stupa.v2i2.8851.

Çavka, H. (2023). An investigation of shopping mall design requirements. MDPI. https://www.mdpi.com/2673-4591/53/1/42

Hausladen, G., Tichelmann, K. (2010.). Interiors Construction Manual. Basel: Birkhauser.

ICSC. (2014). Tenant coordination: Best practices for fit-out and handover. International Council of Shopping Centers. https://www.icsc.com/uploads/event_presentations/TenantCoordination_PeterRow_ERPS_2014.pdf.

Kochar, A., & Rastogi, A. (2023). Challenges and integration of digitalization in fit-out projects. Journal of Research in Infrastructure Designing. Vol 5 no 2. pp. 1-17 http://www.hbrppublication.com/OJS/index.php/JRID/article/view/2909

Madaster. (2025). Circular fit-outs: Rethinking materials in commercial spaces. https://madaster.com/inspiration/circular-fit-outs-rethinking-materials-in-commercial-spaces

Razi, I., Arief, N. C., & Abidin, N. Z. (2021). A review of interior layout and furniture fit-out strategies of bringing greenery indoors. Cultural Syndrome, 3(1), 28–45. https://doi.org/10.30998/cs.v3i1.735

Sahir, S. H. (2021). Metodologi penelitian. KBM Indonesia. Retrieved January 28, 2024, from https://repositori.uma.ac.id/handle/123456789/16455

Williams, B. (1987). Budgeting for fitting out. Facilities, 5(1), 4–10. https://doi.org/10.1108/eb006389




Alamat Redaksi dan Tata Usaha:

Program Studi Desain Interior FAD Institut Teknologi Nasional Bandung
Gedung 1 Lantai 1
Jl. PHH. Mustapa 23 Bandung 40124
Tlp. 022-7272215, Fax. 022-7202892,
e-mail: rekajiva@itenas.ac.id