Perancangan dan Realisasi Kontrol Prototype Landing Gear System Menggunakan PLCmikro berbasis Mikrokontroller PIC16F877A

RATNA SUSANA, USEP ALI ALBAYUMI, NICKY ILHAM TRIADHY

Sari


ABSTRAK

Landing gear system merupakan suatu sistem penggerak pada roda pesawat yang menggunakan electromechanic system dengan sejumlah relay tanpa control terpusat. Melalui penelitian ini, electromechanic system tersebut diubah menjadi landing gear system yang dikendalikan secara terpusat menggunakan mikrokontroller dan diprogram oleh ldmikro berbahasa ladder diagram yang kemudian lebih dikenal dengan nama “PLCmikroâ€. Input discreate digunakan untuk menggerakkan aktuator solenoid valve agar piston double acting cylinder dapat bekerja sesuai sistem yang diinginkan. Input analog digunakan sebagai informasi ketinggian pesawat minimum agar pesawat tetap aman terbang di udara. Control Landing gear system yang direalisasikan berhasil menggerakkan piston masuk maupun keluar dari tabung, memberikan informasi proses pergerakkan piston yang bermasalah dan posisi roda yang telah masuk atau keluar dari pesawat berupa lampu LED. Sistem ini juga berhasil membaca informasi ketinggian minimum pesawat dari potensiometer serta mengubahnya menjadi informasi suara dan lampu LED.

Kata kunci: Landing gear system, PLCmikro, Ldmikro, ladder diagram, double acting cylinder.


ABSTRACT

The landing gear system an aircraft wheel drive system that uses electromechanic system with a relay without any centralized control. Through this study, the electromechanic system was changed to landing gear system with a centrally controlled by using microcontroller and programmed with ldmikro ladder diagram language which came to be known by the name of "PLCmikro". Discreate input used to drive the actuator solenoid valve double acting cylinder so that the piston can work as desired system. The analog input is used as the minimum flight altitude information to keep the plane safe to fly in the air. Landing gear control system is realized successfully drive the piston in and out of the tube, providing information processes are problematic piston movement and wheel position that has entered or exited the plane in the form of LED lights. The system also successfully read the minimum altitude aircraft information of the potentiometer and turn it into information sounds and LED lights. 

Keywords: Landing gear system, PLCmikro, Ldmikro, ladder diagram, double acting cylinder.


Teks Lengkap:

PDF

Referensi


Artanto, Dian. (2012). 60-Aplikasi PLCmikro. Jakarta: Elexmedia Komputindo.

Albayumi, Usep. (2012). Pelatihan PLC Dasar Diklat PT Dirgantara Indonesia. Bandung: PT Dirgantara Indonesia.

Said, Hanif. (2013). Aplikasi Programmable Logic Controller (PLC) dan Sistem Pneumatik pada Industri. Jakarta: Andi Publisher.

Donny, W. P. (2012). Rancang Bangun Prototipe Robot Pengangkut Pallet dengan Teknik Kontrol Wireless Berbasis PLCmikro. Bandung: Politeknik TEDC.

Eka, P. H. (1983). Rancangan Aktuator Pada Roda Pendarat Depan Pesawat N-228. Bandung: PT Dirgantara Indonesia.

Bambang, Emil. (1991). Perencanaan Awal Roda Pendarat Sistem Twin Wheel Pada Pesawat CN-235. Bandung: PT Dirgantara Indonesia.




DOI: https://doi.org/10.26760/elkomika.v2i1.15

Refbacks

  • Saat ini tidak ada refbacks.


_______________________________________________________________________________________________________________________

ISSN (cetak) : 2338-8323 | ISSN (elektronik) : 2459-9638

diterbitkan oleh :

Teknik Elektro Institut Teknologi Nasional Bandung

Alamat : Gedung 20 Jl. PHH. Mustofa 23 Bandung 40124

Kontak : Tel. 7272215 (ext. 206) Fax. 7202892

Surat Elektronik : jte.itenas@itenas.ac.id________________________________________________________________________________________________________________________

Statistik Pengunjung

Free counters!

Web

Analytics Made Easy - StatCounter

Lihat Statistik Jurnal

Jurnal ini terlisensi oleh Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License